HOW TO USE
Your new product should come with a small initial charge and be travel locked out of the box. If it does not have a charge, charge it using the instructions in the charging section below. The product is controlled by one button (found at the base) for power and functions
TRAVEL LOCK
To unlock, press and hold the button for 4 seconds until you feel a quick rumble and see the LED lights flash twice. To lock, repeat this process.
Position Reset: Once locked, there is a 1 minute period for position reset. During this time, quick press the button until the product has returned to the position of your choosing.
ON/OFF
Your product will automatically turn on and be in standby mode when it is unlocked. While it is on, you can turn it off at any time by pressing and holding the button for 2 seconds.
While it is off, you can turn it on by pressing the button once.
FUNCTIONS
Quickly press the button to cycle through all 7 dynamic functions of
vibration/rotation/thrusting.
REMOTE CONTROL
The remote controls the product with 2 buttons. The top button is for cycling through the functions of rotating/thrusting action, and the bottom button is for cycling through the functions of vibration. The two motors can be used simultaneously or independently.
Once the product is turned on/in standby mode, quickly press the top button to cycle through all 7 dynamic functions of rotation/thrusting action. To enter standby mode from the rotation/thrusting setting, press and hold the top button for 2 seconds.
Once the product is turned on/in standby mode, quickly press the bottom button to cycle through all 7 dynamic functions of vibration. To enter standby mode from the vibration setting, press and hold the bottom button for 2 seconds.
To turn off, press and hold the button at the base of the product for 2 seconds. The remote will not turn off the product completely, it will only enter standby mode.
CLEANING:
It is important to clean your product with toy cleaner before and after every use. To clean, simply spray or pump the cleaner onto a cloth or directly onto the applicable surface, and wipe. Wipe away the cleaner with damp cloth and leave the product to air dry.
Always unplug before cleaning and allow to completely dry before use. Do not use any type of solvents such as alcohol or benzene, which may damage not only the finish, but the product itself. To avoid shock, keep the USB cord free from tangling and inspect it for damage frequently.
Note: Apply lubricant before using this product to avoid resistance that can cause the product to go into battery protection mode. If this happens, turn the product off and recharge the battery to turn back on.
CHARGING:
Insert the pin of the USB cord into the charge port located next to the power button on the base of the product, and then plug the USB cord into a USB wall adaptor. The LED light will glow indicating that the unit is charging. When the unit is fully charged, the light will disappear. After charging is complete, the toy will unlock automatically and be in off mode.
If the product will not be used for long periods of time, the battery should be recharged at least once every three months. If possible, avoid fully draining the battery. Charge often between uses to prolong battery life. Only charge with the USB cord provided.
Auto Off:
If the product is left in standby mode without use for more than 10 minutes, it will automatically turn off to preserve battery life.
Note: There is a hole on the suction cup base for air release. This is not a charging port. Do not plug your USB charging cable into this hole.
Health and Safety Precautions:
Do not charge near water.
Do not charge if the USB cord appears damaged.
Do not use other USB cords with your product if the one provided is misplaced.
Do not put the product in the dishwasher or the microwave because it will damage your product.
This product is sold as a novelty only. It is not intended for medical applications or any use that has an adverse effect on any function of the body.
Use a toy cleaner for all your cleaning needs, before and after use.
To avoid injury or aggravation of pre-existing physical conditions, this device should not be used on swollen or inflamed areas of the skin. Clean before and after use. Do not share with other sexual partners. Help to prevent other sexual diseases through the use of condoms, sexual education, proper judgement and rigorous, diligent care.
Never let children play with this product.
In case of pregnancy, diabetes or illness, consult your physician before use.
When travelling, always make sure this product has been properly turned off and locked.
Do not use if the silicone appears broken or damaged.
Only use a water-based lubricant with this product, as silicone-based lubricants have been known to damage silicone products.
Storage:
Avoid extreme heat. When not in use, store this product in a cool, dry place away from the reach of children.
Specifications:
All products are tested for material and electrical safety and are RoHS Compliant and CE Certified.
Note: Should the movement be too intense, the product can be adjusted. To adjust, (Figure 4), simply hold the shaft and gently straighten the tip. Please be careful while adjusting the product, as our warranty will not cover damage from a broken shaft as a result.
WARNING:
DO NOT USE silicone based lubricants with this silicone product as it damages the finish and will void warranty. Use water based lubricants only. Do not bend the shaft or drop your product, as the unit may damage or break, voiding any warranty.
Battery: Lithium 900mAh
Run Time: Up to 40 minutes
Vibrating Frequency: 11000 RPM
Rotating/Thrusting Frequency: 110 RPM
Output: 3.7V
Weight: 365g (not including USB cord)
Composition: Silicone, ABS
Charging Time: Approximately 2.5 hours